I'll be lucky Paul, doesn't even give it the time of day let alone give me a hand with it!!! I have to struggle on, on my own
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| LGY 275P Rises Again! http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=2130 |
Page 26 of 29 |
| Author: | Matt_S [ June 13th, 2014, 11:48 pm ] |
| Post subject: | Re: LGY 275P Rises Again! |
I'll be lucky Paul, doesn't even give it the time of day let alone give me a hand with it!!! I have to struggle on, on my own
|
|
| Author: | Matt_S [ June 21st, 2014, 5:09 pm ] | ||
| Post subject: | Re: LGY 275P Rises Again! | ||
The garage door has been opened and a few hours ( well a while anyway) might be spent having a play... Wish me luck 
|
|||
| Author: | lpgo [ June 21st, 2014, 7:15 pm ] |
| Post subject: | Re: LGY 275P Rises Again! |
Ok. nobody else seems to do it...... Good luck.. |
|
| Author: | fritz [ June 21st, 2014, 8:00 pm ] |
| Post subject: | Re: LGY 275P Rises Again! |
Good luck!! |
|
| Author: | Matt_S [ June 21st, 2014, 8:03 pm ] |
| Post subject: | Re: LGY 275P Rises Again! |
Cheers but it Just seemed to be too bloody heavy, and stuck it wouldn't budge!! Hey ho there is always another day!! 
|
|
| Author: | Matt_S [ June 22nd, 2014, 4:41 pm ] | |||||
| Post subject: | Re: LGY 275P Rises Again! | |||||
I'm almost about to list it on eBay, Managed to get engine parted from gearbox and rest on front of chassis, put the correct release arm spring that joolz kindly gave me, bolted back together and still the drive/driveshafts r locked up solid!!!!  Started to loosen the 4 engine/gearbox off yet again and slowly the driveshafts started to move again but with the background of an awful metal on metal noise!!!!! Sounds like the pressure plate is rubbing on the inside of the bell housing, but why the hell is it doing that?? Gearbox is a standard 4 speed out of a GS and the clutch was supplied by rob at chevronics The whole set up has been fine with the old 1220cc in, then I put this 1299cc I got from Paul aka nelsthebass and suddenly another fucking problem!!!!!  I've hopefully attached a couple of pictures, I know is hard to see when not in the flesh but to those in the know does anything look wrong???? Sorry pics ain't great!!!
|
||||||
| Author: | Luke [ June 23rd, 2014, 4:18 pm ] |
| Post subject: | Re: LGY 275P Rises Again! |
Are all G flywheels the same, or are there different thicknesses? |
|
| Author: | AZS [ June 23rd, 2014, 5:50 pm ] |
| Post subject: | Re: LGY 275P Rises Again! |
Gearbox input shaft looks to be cut off. |
|
| Author: | subarupete [ June 23rd, 2014, 6:21 pm ] |
| Post subject: | Re: LGY 275P Rises Again! |
GS Bellhousing? Attachment: DSC00022.jpg [ 236.92 KiB | Viewed 9056 times ] |
|
| Author: | Matt_S [ June 23rd, 2014, 7:50 pm ] |
| Post subject: | Re: LGY 275P Rises Again! |
Have I got an ami box not a gs one??? |
|
| Page 26 of 29 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|