International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
1988 2cv D*lly bits and bobs http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=1754 |
Page 41 of 44 |
Author: | Sean [ May 21st, 2012, 10:26 pm ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
why not fix the toeboard while its an easy half hour job? |
Author: | J-dub [ May 21st, 2012, 10:29 pm ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
It's being done in a few weeks. My mum seems to think if I had a welder in the garage is burn the street down :S Ive only welded thick metal and not thin so no where near enough experience or knowledge |
Author: | Neil [ May 21st, 2012, 10:34 pm ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
Jameswallace wrote: don't want to do in neccasary work How very unlike you. |
Author: | J-dub [ May 21st, 2012, 10:38 pm ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
Neil wrote: Jameswallace wrote: don't want to do in neccasary work How very unlike you. Had a giggle at that Yes indeed But I like doing things like this. I've learnt a lot and learning is what it is all about |
Author: | Neil [ May 21st, 2012, 10:47 pm ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
Aye, tru dat |
Author: | J-dub [ May 24th, 2012, 10:47 pm ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
Got my brother lined up to get the body back on the chassis on Monday, Waxoyl still seems a bit wet, warm weathers not helping!!! Aim to have the beast back on the road in a week |
Author: | samfieldhouse [ May 25th, 2012, 1:00 am ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
When did you last change the gearbox oil? |
Author: | J-dub [ May 25th, 2012, 3:26 am ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
In November about 5 k miles ago. Why? I need to change it again really, when I did change it it was gloop not oil!! Can neve seem to find the right gearbox oil in frauds tho..... |
Author: | Sean [ May 25th, 2012, 9:14 am ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
used a synth stuff from the Fraudhut but it seems to like coming out the breather holes and gear rod housing http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_209375_langId_-1_categoryId_255220 http://www.halfords.com/webapp/wcs/stor ... yId_255220 |
Author: | J-dub [ May 25th, 2012, 9:31 am ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
Sean wrote: used a synth stuff from the Fraudhut but it seems to like coming out the breather holes and gear rod housing http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_209375_langId_-1_categoryId_255220 http://www.halfords.com/webapp/wcs/stor ... yId_255220 Cheers Sean May as well do another 'box oil change soon |
Page 41 of 44 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |