International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
1988 2cv D*lly bits and bobs http://www.international2cvfriends.com/forum/viewtopic.php?f=5&t=1754 |
Page 5 of 44 |
Author: | J-dub [ May 27th, 2010, 11:03 pm ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
no my stupidity shouldnt of admitted to it owell lol we all have a slightly less, intelegant side to us if u like, mine is friggin spelling :@ after bumped i think i will be straighting the back bumPPPPer out as its not quite straight, and then painting the wings |
Author: | J-dub [ May 27th, 2010, 11:04 pm ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
would never of realised if you hadnt mentioned it to hahaha |
Author: | J-dub [ May 31st, 2010, 11:43 pm ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
hopefully work on bumpers starts on Wednesday, bought the paint, its white, said it was for bumpers, although my bumpers are slightly off wight, oh well i dont mind also bought tape for front bumper as the black has been hand painted on and it looks naff will post photos Wednesday as i go..... |
Author: | Joe [ May 31st, 2010, 11:49 pm ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
nice one, my rear bumper is pretty shagged, its not rusty but its about as straight as a twilight movie. i think they look a nicer a bit battered! |
Author: | J-dub [ May 31st, 2010, 11:54 pm ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
yer mines like that, on the top and bottom, might take it off and find a flat surface and gently flattern it out, the bumpers arent old although looking at the price of a new bumper (35 i think i saw) not really worth spending a hole day doing it.... may sand down my new door instead |
Author: | J-dub [ June 2nd, 2010, 1:56 pm ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
well as i said ive been doing my bumpers today they where all bubbily with rust, they werent bad but i didnt like it..... heres the pics so far..... bumper before removing (with out what i call the stops on, what are they actually called?!) first coat, good buy mr rust (hopefully) second coat next will be wet flatting the 2nd coat and then doing 2 more and itll be done. then i will be sanding back my door, and also priming my wing, hopefully do that with a spray gun.... photos to follow.... |
Author: | Joe [ June 2nd, 2010, 2:23 pm ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
nice job mate, touches like this really bring the car up! these bumpers tend to rust out in 4 or so years. i have waxyoiled the the seams at the back and that seems to make them last long, (less rust this year than last year) |
Author: | J-dub [ June 2nd, 2010, 2:27 pm ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
thanks my bumpers arent that old, only thing on the car non oroginal i also replaced the trim rodnu the guttering on sunday, bought it from ecas and 5 mins later fitted it, made the car look so much better |
Author: | ben [ June 2nd, 2010, 2:33 pm ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
Jameswallace wrote: (with out what i call the stops on, what are they actually called?!) ... Over-riders. |
Author: | J-dub [ June 2nd, 2010, 2:35 pm ] |
Post subject: | Re: 1988 2cv D*lly bits and bobs |
new it was something like that thanks for correcting me |
Page 5 of 44 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |