View unanswered posts | View active topics It is currently March 28th, 2024, 12:14 pm



Reply to topic  [ 13 posts ]  Go to page 1, 2  Next
 Antique 2cv I had a look at 
Author Message
Firing on two.

Joined: June 22nd, 2014, 8:09 pm
Posts: 1179
Location: Reading, Berks UK
Post Antique 2cv I had a look at
I found someone in my town has a 2cv! Its been sat outdoors for years and the motor is seized, but its still gorgeous. I really hope he gets it up and running. He's a VW guy normally and does his own stuff.

I've never seen an old 2cv up close, the oldest was my last one which was about 1980 I think. So much is different isn't it.

Attachment:
Old2cv1.jpg
Old2cv1.jpg [ 122.52 KiB | Viewed 8559 times ]


Attachment:
old2cv6.jpg
old2cv6.jpg [ 168.4 KiB | Viewed 8559 times ]


Attachment:
old2cv5.jpg
old2cv5.jpg [ 195.61 KiB | Viewed 8559 times ]


January 29th, 2023, 8:49 pm
Profile
Firing on two.
User avatar

Joined: October 22nd, 2014, 10:59 pm
Posts: 1993
Location: South-Limburg
Post Re: Antique 2cv I had a look at
Nice, it's rather old, it still has the 12HP or 13,5HP engine. Car could be 1961 or 1962, the AZAM front bumper is maybe not original (1963)


January 29th, 2023, 11:02 pm
Profile
Firing on two.

Joined: November 2nd, 2011, 12:35 pm
Posts: 583
Location: Charente-Maritime
Post Re: Antique 2cv I had a look at
Wow! What a fabulous "barn find". Last registered in Corrèze (19). Can't be many of these left to find on Brexit Island! Have fun getting it running.


January 30th, 2023, 11:52 am
Profile
Firing on two.

Joined: June 22nd, 2014, 8:09 pm
Posts: 1179
Location: Reading, Berks UK
Post Re: Antique 2cv I had a look at
I do love it. Its my new 2cv friends car. He plans to get it running and keep the motor but put a big bore kit on it to help it out a little. And keep much of the patina. It has a lot of character even in this condition.


January 30th, 2023, 1:08 pm
Profile
Firing on two.
User avatar

Joined: October 22nd, 2014, 10:59 pm
Posts: 1993
Location: South-Limburg
Post Re: Antique 2cv I had a look at
You can put a 18hp barrel, head and piston set on it with the fitting manifold. Than you can it use it in normal traffic even motorway.It will do 90 to 100 km/H. If you don't have a nose wind.. But i drive the 12 hp in daily traffic it works only uphill it's a bit slow sometimes. ;-) But it's a lot of fun to drive it.


January 30th, 2023, 6:17 pm
Profile
Firing on two.
User avatar

Joined: January 1st, 2009, 7:37 pm
Posts: 4695
Location: Disunited Kingdom
Post Re: Antique 2cv I had a look at
With just 19bhp on tap, I finds my 1932 Morris Minor very slow, especially on hills. Saying that, I wouldn't want to go any quicker than the 40-45mph it and I are comfortable with. It doesn't help hill-climbing that I only have three gears in my 'box.

_________________
1988 built (1989 F-registered) Citroën 2CV-Six
2013 (63-Plate) VW Golf SE 1.4TSI BMT DSG7
1932 Morris Minor Open Two-Seater (The £100 car).
Image
Image


January 31st, 2023, 12:01 am
Profile
Firing on two.

Joined: April 9th, 2010, 12:21 am
Posts: 463
Location: West Sussex
Post Re: Antique 2cv I had a look at
I thinks it's from between March & December 1964, with an earlier (3-stud = pre Feb '63) engine fitted.

It's got the totally flat rear-light/number-plate panel and rear lenses from after March '64. (Prior to that, the panel had 3 rectangles and the lenses didn't incorporate number-plate lights).
It's got suicide doors, so before Dec '64.

Is it an AZAM or has it just had AZAM parts added?:
It's got the AZAM steering wheel, bumpers & r/h sun-visor.
It's difficult to see on my small phone screen but has it got the AZAM aluminium trim in the rear door window rubber? Has it also got the stainless surround on the flip-up window, (which only the AZAM had before 1970)?
However, didn't AZAMs have a sliding bench seat and different door handles?


January 31st, 2023, 2:54 am
Profile WWW
Firing on two.
User avatar

Joined: March 21st, 2013, 12:04 am
Posts: 1577
Location: Exeter, Devon
Post Re: Antique 2cv I had a look at
I don't care what it is .... I WANT IT :D

I'm not a rivet counter :D

_________________
If you can't fix it with a hammer, it's probably electrical (or, an electric fuel pump!) ....


January 31st, 2023, 6:06 pm
Profile
Firing on two.
User avatar

Joined: August 8th, 2012, 11:00 am
Posts: 480
Location: Korpilahti, Finland
Post Re: Antique 2cv I had a look at
About 60 years old, and wondering is it still original..? :lol:

Roger, I can understand you...


January 31st, 2023, 6:49 pm
Profile
Firing on two.
User avatar

Joined: October 22nd, 2014, 10:59 pm
Posts: 1993
Location: South-Limburg
Post Re: Antique 2cv I had a look at
For your info there are only 6 rivets.... in the licence plates... ;-)


January 31st, 2023, 7:55 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 13 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 89 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.