Have broken 3 indicator stalks....
So I made a new one from a piece of square bar.
Attachment:
P1000528.jpg [ 173.56 KiB | Viewed 4325 times ]
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Indicator Stalk http://www.international2cvfriends.com/forum/viewtopic.php?f=4&t=6259 |
Page 1 of 1 |
| Author: | subarupete [ August 16th, 2019, 2:33 pm ] |
| Post subject: | Indicator Stalk |
Have broken 3 indicator stalks.... So I made a new one from a piece of square bar. Attachment: P1000528.jpg [ 173.56 KiB | Viewed 4325 times ] |
|
| Author: | Taskos [ August 17th, 2019, 5:00 pm ] |
| Post subject: | Re: Indicator Stalk |
Probably next thing broken would be the switch casing itself.  Aluminium isn't ? |
|
| Author: | subarupete [ August 17th, 2019, 5:36 pm ] |
| Post subject: | Re: Indicator Stalk |
Piece of aluminum scrap. Breakage may happen, but I believe the items fitted to Dyane's are the same switch but with a metal shaft See link for a 2nd hand item from the "Oxford Abattoir". https://www.ebay.co.uk/itm/Citroen-Dyane-indicator-switch-1000s-Dyane-partabbotoires-in-stock/283538345303?hash=item420433cd57:g:dd4AAOxyoA1RShdW |
|
| Author: | Jonathan [ August 17th, 2019, 10:33 pm ] |
| Post subject: | Re: Indicator Stalk |
Got a Dyane stalk fitted to the 2CV indicator switch. Works very well, as the Dyane stalk has a slight kink that moves it a bit closer to the wheel. |
|
| Author: | chevrons2 [ August 18th, 2019, 1:38 am ] |
| Post subject: | Re: Indicator Stalk |
subarupete wrote: ....See link for a 2nd hand item from the "Oxford Abattoir"..... £38 for a second-hand switch! That's a whole £1 less than a new one. |
|
| Author: | Ianredspecial [ November 16th, 2019, 11:00 am ] |
| Post subject: | Re: Indicator Stalk |
Love the alu one. Beyond my skill set, might check out this Dyane option though. Thanks guys. |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|