| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Transporting a 2cv body http://www.international2cvfriends.com/forum/viewtopic.php?f=4&t=6258 |
Page 1 of 2 |
| Author: | subarupete [ August 14th, 2019, 1:40 pm ] |
| Post subject: | Transporting a 2cv body |
Hi All, What sort of van has been used to transport a 2cv body (safely) with van doors shut. VW T5??? Regards Peter |
|
| Author: | AZL57 [ August 14th, 2019, 4:17 pm ] |
| Post subject: | Re: Transporting a 2cv body |
citroen jumper? I did transport them on an little camper trailer several times. |
|
| Author: | paravion [ August 16th, 2019, 10:22 pm ] |
| Post subject: | Re: Transporting a 2cv body |
Think sprinter and vw crafter definitely Brian... |
|
| Author: | subarupete [ August 17th, 2019, 9:35 am ] |
| Post subject: | Re: Transporting a 2cv body |
Thanks Guys, My VW Transport's load bay is about 130mm too short. But maybe I can leave the door's open a bit? |
|
| Author: | Geert [ August 17th, 2019, 10:22 am ] |
| Post subject: | Re: Transporting a 2cv body |
You could load the body-shell with the front higher . If you have some wood or anything else, you could make a sort of a bench in the front of the bay , so the front of the shell is higher and stabil . It just could make the difference . |
|
| Author: | subarupete [ August 17th, 2019, 11:09 am ] |
| Post subject: | Re: Transporting a 2cv body |
@Geert, Had similar idea, the "diagonal" line is longer. With the shape of the front part of the body, I think its a case of seeing if its fits |
|
| Author: | AZL57 [ August 17th, 2019, 1:53 pm ] |
| Post subject: | Re: Transporting a 2cv body |
with the body upside down it's easier to tilt it. |
|
| Author: | samfieldhouse [ August 19th, 2019, 9:16 pm ] |
| Post subject: | Re: Transporting a 2cv body |
Wont fit a T4/5 Sprinter/Crafter and you're golden, you can drive a 2cv straight into one. |
|
| Author: | samfieldhouse [ August 19th, 2019, 9:16 pm ] |
| Post subject: | Re: Transporting a 2cv body |
And nope, for sure will not fit a VW Transporter. We tried. Right way up, on its side, upside down, with the B pillars closed up with a ratchet strap... |
|
| Author: | samfieldhouse [ August 19th, 2019, 9:24 pm ] |
| Post subject: | Re: Transporting a 2cv body |
|
|
|
| Page 1 of 2 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|