View unanswered posts | View active topics It is currently March 28th, 2024, 10:29 am



Reply to topic  [ 16 posts ]  Go to page 1, 2  Next
 replacement wheels 
Author Message
Firing on two.

Joined: March 15th, 2009, 12:37 pm
Posts: 153
Post replacement wheels
just wondering if anyone has purchased some wheels lately ?
mine are the originals but rusty !

I see franzose have them and claim to be the only supplier who sells the original pressed and spot welded ones,although they have to be painted over the coating they come with

Is this just good marketing , or are the other suppliers wheels ,Ecas etc selling something slightly different
I was going to get them blasted and powder coated ,but I doubt they will get the rust out of the seams
they can be bought painted , think they were £60 each or something
cheers
Matt


October 10th, 2015, 1:53 pm
Profile
Firing on two.
User avatar

Joined: November 11th, 2010, 4:19 pm
Posts: 590
Post Re: replacement wheels
Hi Matt just bought one here : http://www.renov-2cv-mehari36.com/en/ty ... -gray.html
Bill for wheel, tyre, & a cill was £135 delivered, same from Roy; £190. Would rather buy from Roy but...
However. It not arrived yet - 7 days quoted, ordered yesterday - will comment on wheel when arrived. Have used them before and it was perfectly fine.
mike

_________________
Mike


October 11th, 2015, 2:41 pm
Profile
Firing on two.

Joined: April 27th, 2012, 6:48 pm
Posts: 709
Post Re: replacement wheels
the 2cv is supposed to be cheap transport --paying that for a wheel is daft then buying tyers on top :roll:


October 18th, 2015, 6:23 am
Profile
Firing on two.

Joined: June 22nd, 2014, 8:09 pm
Posts: 1179
Location: Reading, Berks UK
Post Re: replacement wheels
I'm going for Michelin wheels, since one of my 2cv City set has gone wonky.


October 18th, 2015, 12:37 pm
Profile
Firing on two.

Joined: March 15th, 2009, 12:37 pm
Posts: 153
Post Re: replacement wheels
michelin wheels ?

did your new set arrive yet citroenboat ?>
cheers


October 19th, 2015, 10:59 am
Profile
Firing on two.
User avatar

Joined: November 11th, 2010, 4:19 pm
Posts: 590
Post Re: replacement wheels
Not yet! They have been unable to get the french post office to take the cill?! So refunded for that. Still waiting for wheel & tyre... :roll: 10 days & counting.

mike

_________________
Mike


October 21st, 2015, 12:06 am
Profile
Agony Aunt - You have a car problem? Speak to Ken

Joined: March 6th, 2009, 1:40 am
Posts: 3675
Post Re: replacement wheels
https://www.youtube.com/watch?v=MSHr4ubuD64 ? :cry:


citroenboat wrote:
Not yet! They have been unable to get the french post office to take the cill?! So refunded for that. Still waiting for wheel & tyre... :roll: 10 days & counting.

mike

_________________
Image


October 21st, 2015, 12:52 am
Profile
Firing on two.
User avatar

Joined: November 11th, 2010, 4:19 pm
Posts: 590
Post Re: replacement wheels
:lol: :lol: :lol:
Mmm... perhaps this is more like it : https://www.youtube.com/watch?v=RghKdGn8h5A

_________________
Mike


October 21st, 2015, 1:15 am
Profile
Firing on two.
User avatar

Joined: November 11th, 2010, 4:19 pm
Posts: 590
Post Re: replacement wheels
Wheel & tyre turned up last monday :D
Tuesday a big box arrived from Franzose with a load of other bits I ordered - including the cill that the French post wouldn't take... Post from Germany clearly faster and more accomodating! ;)

_________________
Mike


October 24th, 2015, 3:17 pm
Profile
Firing on two.

Joined: March 15th, 2009, 12:37 pm
Posts: 153
Post Re: replacement wheels
How do they look ?
What's the finish like on them


October 25th, 2015, 10:08 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 16 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: haryg and 46 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.