International2cvFriends.com
http://www.international2cvfriends.com/forum/

PO Bumpers for Vans
http://www.international2cvfriends.com/forum/viewtopic.php?f=4&t=5657		 Page 1 of 3
Author:  Pony [ June 10th, 2015, 9:02 pm ]
Post subject:  PO Bumpers for Vans
At last after having my tube bending machine for about 15 years i re produced the Original PO front bumper for 2CV Vans
This is different from the Raid / Adventure bumper
( lower, different fittings and a rolled under tray + brackets to mount to the engine cross member )
and is a direct replacement for the original only with slighter thicker materials
i will bring some to Poland
Enjoy

Attachments:
IMG_1900.JPG
IMG_1900.JPG [ 723.02 KiB | Viewed 9352 times ]
IMG_1899.JPG
IMG_1899.JPG [ 643.97 KiB | Viewed 9352 times ]
Author:  Roy Eastwood [ June 11th, 2015, 2:32 am ]
Post subject:  Re: PO Bumpers for Vans
Very nice
Author:  2CViking [ June 11th, 2015, 8:23 am ]
Post subject:  Re: PO Bumpers for Vans
Indeed. Price please PM.?
Author:  lpgo [ June 11th, 2015, 12:10 pm ]
Post subject:  Re: PO Bumpers for Vans
want one for my Sahara replica.... looking good...
Author:  Miarke [ June 11th, 2015, 5:13 pm ]
Post subject:  Re: PO Bumpers for Vans
These look great will there be a way for people in the UK to get these?
Author:  AZS [ June 11th, 2015, 6:21 pm ]
Post subject:  Re: PO Bumpers for Vans
http://www.vgs2cv.be/index.php/en/websh ... 2cv-detail
Author:  Pony [ June 11th, 2015, 8:43 pm ]
Post subject:  Re: PO Bumpers for Vans
Re PO Bumpers Roy at ECAS will have the first 3 samples in about 2 weeks
and then a larger supply soon after that.
Pierre Focant in Belgium who is my dealer for all french speaking countries will also soon have stock
I think he sells the raid front bumper for about 150 euro plus delivery.

I will take a few to the world meeting
Pricing not yet sorted, but it will be similar to the Raid type bumper i manufacture.

By the way this part is not a made from out sourced low quality or incorrect components.
(Chinise crap)
All steel is cold rolled (not low grade black), The Over riders are pressed in house and all the welds are sand blasted before the 2 component primer is sprayed, however they will need to be flattened down before painting to colour, to be fully protected
as the primer is only for transit / storage
Author:  Pony [ June 14th, 2015, 7:54 pm ]
Post subject:  Re: PO Bumpers for Vans
seems like there is some demand here as it looks like up to 20 on order so far
thanks for the feed back
Author:  Robcap [ June 18th, 2015, 9:02 pm ]
Post subject:  Re: PO Bumpers for Vans
I'm also very interested. Will keep an eye out.

Do you also make them for the rear? (just the staight tube, like on the sahara?)
Author:  Pony [ June 18th, 2015, 9:56 pm ]
Post subject:  Re: PO Bumpers for Vans
For the rear
i can offer you an open choice
Straight
curved ends
with a mix of hoops or the over rider like the sahara
Roy ECAS in the UK has a stock of the most common ones
but if you like a special one made up it would not be a problem,
as i have all the jigs tubes and mounts in stock
Page 1 of 3 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/