| Author |
Message |
|
Pony
Firing on two.
Joined: January 16th, 2010, 5:15 pm
Posts: 212
|
 PO Bumpers for Vans At last after having my tube bending machine for about 15 years i re produced the Original PO front bumper for 2CV Vans
This is different from the Raid / Adventure bumper
( lower, different fittings and a rolled under tray + brackets to mount to the engine cross member )
and is a direct replacement for the original only with slighter thicker materials
i will bring some to Poland
Enjoy
Attachments:
IMG_1900.JPG [ 723.02 KiB | Viewed 6847 times ]
IMG_1899.JPG [ 643.97 KiB | Viewed 6847 times ]
_________________
|
| June 10th, 2015, 9:02 pm |
|
|
|
Roy Eastwood
Firing on two.
Joined: February 4th, 2009, 2:52 pm
Posts: 268
|
Re: PO Bumpers for Vans Very nice
|
| June 11th, 2015, 2:32 am |
|
|
|
2CViking
viking bastard
Joined: April 18th, 2009, 11:43 am
Posts: 2424
Location: Meneac, Bretagne France
|
Re: PO Bumpers for Vans Indeed. Price please PM.?
_________________
|
| June 11th, 2015, 8:23 am |
|
|
|
lpgo
Firing on 1-2 Spark
Joined: November 8th, 2009, 5:42 pm
Posts: 2846
Location: NL
|
Re: PO Bumpers for Vans want one for my Sahara replica.... looking good...
_________________
Russell wrote: Hi Geo,
you've been one of the sites biggest attractions in recent years.
Russ
|
| June 11th, 2015, 12:10 pm |
|
|
|
Miarke
2CV Fan
Joined: February 23rd, 2009, 3:57 am
Posts: 36
|
Re: PO Bumpers for Vans These look great will there be a way for people in the UK to get these?
_________________
|
| June 11th, 2015, 5:13 pm |
|
|
|
AZS
Firing on two.
Joined: December 22nd, 2013, 5:01 am
Posts: 300
Location: Netherlands
|
Re: PO Bumpers for Vans
|
| June 11th, 2015, 6:21 pm |
|
|
|
Pony
Firing on two.
Joined: January 16th, 2010, 5:15 pm
Posts: 212
|
Re: PO Bumpers for Vans Re PO Bumpers Roy at ECAS will have the first 3 samples in about 2 weeks
and then a larger supply soon after that.
Pierre Focant in Belgium who is my dealer for all french speaking countries will also soon have stock
I think he sells the raid front bumper for about 150 euro plus delivery.
I will take a few to the world meeting
Pricing not yet sorted, but it will be similar to the Raid type bumper i manufacture.
By the way this part is not a made from out sourced low quality or incorrect components.
(Chinise crap)
All steel is cold rolled (not low grade black), The Over riders are pressed in house and all the welds are sand blasted before the 2 component primer is sprayed, however they will need to be flattened down before painting to colour, to be fully protected
as the primer is only for transit / storage
_________________
|
| June 11th, 2015, 8:43 pm |
|
|
|
Pony
Firing on two.
Joined: January 16th, 2010, 5:15 pm
Posts: 212
|
Re: PO Bumpers for Vans seems like there is some demand here as it looks like up to 20 on order so far
thanks for the feed back
_________________
|
| June 14th, 2015, 7:54 pm |
|
|
|
Robcap
Joined: May 10th, 2013, 1:29 pm
Posts: 24
|
Re: PO Bumpers for Vans I'm also very interested. Will keep an eye out.
Do you also make them for the rear? (just the staight tube, like on the sahara?)
_________________
 2VC 1980, Vert Embrun
|
| June 18th, 2015, 9:02 pm |
|
|
|
Pony
Firing on two.
Joined: January 16th, 2010, 5:15 pm
Posts: 212
|
Re: PO Bumpers for Vans For the rear
i can offer you an open choice
Straight
curved ends
with a mix of hoops or the over rider like the sahara
Roy ECAS in the UK has a stock of the most common ones
but if you like a special one made up it would not be a problem,
as i have all the jigs tubes and mounts in stock
_________________
|
| June 18th, 2015, 9:56 pm |
|
|
Who is online |
Users browsing this forum: No registered users and 125 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
