| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Dyane speedo - CONFUSED http://www.international2cvfriends.com/forum/viewtopic.php?f=4&t=4538 |
Page 1 of 1 |
| Author: | ChrisW [ February 11th, 2013, 8:02 pm ] | ||
| Post subject: | Dyane speedo - CONFUSED | ||
I have had 2 Dyanes - this one 1976 and my first 1979. Both had Jaeger speedos and both extactly the same 0 to 130 kph. I have just received my 2CV magazine and in there is a 1977 Dyane with speedo 0 - 140 kph. The thing that confuses me is the line on mine which is 10 is 20 on this one and the 130 is 140. Would this car have a different gear drive for the speedo and WHY the difference. Any ideas 
|
|||
| Author: | Roy Eastwood [ February 11th, 2013, 11:58 pm ] |
| Post subject: | Re: Dyane speedo - CONFUSED |
methinks thou dost search too deep |
|
| Author: | smyth602 [ February 12th, 2013, 12:05 am ] |
| Post subject: | Re: Dyane speedo - CONFUSED |
Not sure of the WHY, but my acad is 20-140, and i think my dad's is the same. |
|
| Author: | Roy Eastwood [ February 12th, 2013, 10:56 am ] |
| Post subject: | Re: Dyane speedo - CONFUSED |
Seriously, there is no difference in drive, cable or gearing it's just the face, could not detail years or reasons, can assure that they are entirely interchangeable, with 4 Acadianes in my 'parc' I shall now have to examine for differences..... |
|
| Author: | Sean [ February 12th, 2013, 11:45 am ] |
| Post subject: | Re: Dyane speedo - CONFUSED |
its the "Spinal Tap" effect |
|
| Author: | ken [ February 12th, 2013, 12:04 pm ] |
| Post subject: | Re: Dyane speedo - CONFUSED |
Roy, maybe Dyane 4? Because of different cogs inside the gearbox, the take-off gears for the speedo drive in a 435 box are 3/14 instead of the 602's 4/16. ken Roy Eastwood wrote: Seriously, there is no difference in drive, cable or gearing it's just the face, could not detail years or reasons, can assure that they are entirely interchangeable, with 4 Acadianes in my 'parc' I shall now have to examine for differences..... |
|
| Author: | smyth602 [ February 12th, 2013, 1:04 pm ] |
| Post subject: | Re: Dyane speedo - CONFUSED |
ken wrote: Roy, maybe Dyane 4? Because of different cogs inside the gearbox, the take-off gears for the speedo drive in a 435 box are 3/14 instead of the 602's 4/16. ken Roy Eastwood wrote: Seriously, there is no difference in drive, cable or gearing it's just the face, could not detail years or reasons, can assure that they are entirely interchangeable, with 4 Acadianes in my 'parc' I shall now have to examine for differences..... Oooh - buuuuuuurn! 
|
|
| Author: | Roy Eastwood [ February 12th, 2013, 3:08 pm ] |
| Post subject: | Re: Dyane speedo - CONFUSED |
French Dyane club is always rather good on Dyane differences and is slightly ambiguous after 1977: http://dyaneclub.free.fr/?page_id=489 |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|