| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| can new chassis plates be made? http://www.international2cvfriends.com/forum/viewtopic.php?f=4&t=133 |
Page 1 of 2 |
| Author: | Little Louis [ February 20th, 2009, 6:16 pm ] |
| Post subject: | can new chassis plates be made? |
i have a log book for the car but no chassis plate.could i have one made? thanks |
|
| Author: | Neil [ February 20th, 2009, 7:07 pm ] |
| Post subject: | Re: can new chassis plates be made? |
there's plenty of blanks on eBay.fr  http://cgi.ebay.fr/Plaque-constructeur- ... 0161693642  http://cgi.ebay.fr/Plaque-chassis-2CV_W ... 67QQihZ024 or you could just stamp the number on a bit of alloy - i'm not saying it's right, just i've owned & mot'd a 2cv with a chassis plate like this & have seen similar on other A-series... 
|
|
| Author: | Luke [ February 20th, 2009, 7:44 pm ] |
| Post subject: | Re: can new chassis plates be made? |
I've been sent back from an MOT to stamp the number on a bit of alloy. As far as I know, there's no rules as to how it's displayed, just so long as it is. 
|
|
| Author: | Little Louis [ February 20th, 2009, 7:50 pm ] |
| Post subject: | Re: can new chassis plates be made? |
|
|
| Author: | Jacqueslemac [ February 20th, 2009, 8:18 pm ] |
| Post subject: | Re: can new chassis plates be made? |
I don't think it's a crime to make your own one up, just so long as it's not part of an attempt to defraud or something equally naughty. |
|
| Author: | Russell [ February 20th, 2009, 8:20 pm ] |
| Post subject: | Re: can new chassis plates be made? |
I'll get some pictures of the plate on the Ami tommorow, its just a bit of ally I found on the workshop floor! (its big so you can't see the 'other' chassis plate I forgot to remove...) |
|
| Author: | 2cvmadman [ February 20th, 2009, 8:39 pm ] |
| Post subject: | Re: can new chassis plates be made? |
Luke wrote: I've been sent back from an MOT to stamp the number on a bit of alloy. As far as I know, there's no rules as to how it's displayed, just so long as it is. They are fussy and i am sure it has to be on a proper plate. We just take the last Mot with us and he just types in the number on to his computer and voila. |
|
| Author: | meshking [ February 20th, 2009, 8:51 pm ] |
| Post subject: | Re: can new chassis plates be made? |
Is this for an older car? I thought that later 2cvs only had plates on the bulkhead? My 74 has one on the chassis - well, it did. That plate hasn't made it to the new chassis just yet. The 89 didn't have one on the old chassis at all. |
|
| Author: | Little Louis [ February 20th, 2009, 8:53 pm ] |
| Post subject: | Re: can new chassis plates be made? |
yeh its on the bulk head on newer ones |
|
| Author: | Neil [ February 20th, 2009, 8:57 pm ] |
| Post subject: | Re: can new chassis plates be made? |
i'm sure mid 70's 2cv's had the above type black n' silver plates rivetted on he bulkhead as the plain alloy ones of the 80's - if you can get away with a bit of alloy with some very amateur looking stamping on it, i'm pretty certain you can pull off an earlier type plate...? |
|
| Page 1 of 2 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|