| Author |
Message |
|
baron_matt
Firing on two.
Joined: January 24th, 2010, 12:22 am
Posts: 386
Location: Buckinghoonshire
|
 2cv boot board Hi
Does anyone on here have a 2CV boot board ie a board that sits on top of the spare wheel in the boot and makes a flat floor.
I'm looking to make one and a template would be really useful. I know "wendy" used to make one years ago but sadly mine when when I sold my last 2cv in 2007.
Cheers
Matt
_________________
1973 Ami 8 Club
1977 2CV6 Belgian built RHD blue
|
| January 28th, 2015, 2:21 pm |
|
|
|
samfieldhouse
Firing on two.
Joined: February 11th, 2009, 12:32 am
Posts: 3324
Location: Chichester, West Sussex
|
Re: 2cv boot board Yes in the back of my D*lly which if you'd said on Sunday I could have lent it to you as a pattern! I'd suggest making a card template and spending some quality time with a jigsaw and some 12mm ply 
|
| January 29th, 2015, 1:26 am |
|
|
|
baron_matt
Firing on two.
Joined: January 24th, 2010, 12:22 am
Posts: 386
Location: Buckinghoonshire
|
Re: 2cv boot board If you are happy to let me draw round your board then let me know when you are out in it next and I'll have cardboard an a marker pen on standby.
_________________
1973 Ami 8 Club
1977 2CV6 Belgian built RHD blue
|
| January 29th, 2015, 3:59 pm |
|
|
|
Sean
Firing on two.
Joined: April 22nd, 2009, 11:06 pm
Posts: 3684
Location: Ecosse
|
Re: 2cv boot board matt i find a squarish board that sits up against the back of the seat frame and rests on the top of the light panel you have to cut out little squares on the corner to clear the roof rails section. if you just make it boot hole shaped it teeters about on the dome of the spare wheel. its ridiculously easy to make the template will take longer
9mm ply for mine covered in grey carpet
_________________
Kissing the Lash
"Any advice of a technical nature is given on the understanding that I've actually done this shit, not just read about it in D*lly club mag some time ago.
|
| January 30th, 2015, 1:55 am |
|
|
|
Luke
Firing on two.
Joined: December 9th, 2008, 7:50 pm
Posts: 662
|
Re: 2cv boot board Just buy a Dyane!
|
| January 30th, 2015, 4:23 pm |
|
|
|
knightley
Firing on two.
Joined: June 19th, 2010, 8:40 pm
Posts: 761
Location: Kingswood, S.Glos.
|
Re: 2cv boot board Luke wrote: Just buy a Dyane! I have a spare Dyane spare wheel cover/floor if anyone is interested. Reasonable nick. FOC. Collect would be best.
_________________
John Jordan
It is a truth universally acknowledged, that a single man in possession of a good fortune must be in want of a d'olly.
|
| January 30th, 2015, 5:27 pm |
|
|
|
richardmorris
Firing on two.
Joined: July 9th, 2009, 10:27 am
Posts: 493
Location: Bagshot Park
|
Re: 2cv boot board Sean wrote: matt i find a squarish board that sits up against the back of the seat frame and rests on the top of the light panel you have to cut out little squares on the corner to clear the roof rails section. if you just make it boot hole shaped it teeters about on the dome of the spare wheel. its ridiculously easy to make the template will take longer
9mm ply for mine covered in grey carpet Turn the wheel the other way up then. That also lets you fill it with spares.
|
| February 2nd, 2015, 12:13 am |
|
|
