International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
Transfer box.. A new version... http://www.international2cvfriends.com/forum/viewtopic.php?f=19&t=6468 |
Page 4 of 7 |
Author: | subarupete [ April 18th, 2024, 8:00 am ] |
Post subject: | Re: Transfer box.. A new version... |
On the list...................... |
Author: | AZL57 [ April 18th, 2024, 5:41 pm ] |
Post subject: | Re: Transfer box.. A new version... |
Sorry to make jour list longer.... |
Author: | subarupete [ April 18th, 2024, 5:47 pm ] |
Post subject: | Re: Transfer box.. A new version... |
Geen problem..... "Bodging" in my garage keeps me sane |
Author: | subarupete [ April 19th, 2024, 2:34 pm ] |
Post subject: | Re: Transfer box.. A new version... |
Measure many times... Still need shim to align with the brake disc... |
Author: | subarupete [ April 23rd, 2024, 5:12 pm ] |
Post subject: | Re: Transfer box.. A new version... |
Supports for calipers done, discs dont bind, so happy. Need to purchasesome steel bar to turn up the drive flange. |
Author: | AZL57 [ April 23rd, 2024, 7:46 pm ] |
Post subject: | Re: Transfer box.. A new version... |
nicely done. |
Author: | subarupete [ April 26th, 2024, 3:16 pm ] |
Post subject: | Re: Transfer box.. A new version... |
https://youtube.com/shorts/JDHdhyUXRnM?feature=share |
Author: | subarupete [ April 27th, 2024, 9:00 pm ] |
Post subject: | Re: Transfer box.. A new version... |
Pile of parts to be cleaned and assembled (eventually). . . |
Author: | subarupete [ April 30th, 2024, 1:18 pm ] |
Post subject: | Re: Transfer box.. A new version... |
Stages to make a drive flange Initial 90mm x 100m EN24 T Steel Bar. First stage of turning (between centres) as its a large lump of material, This another , the new item will have a tail at 70mm. |
Author: | subarupete [ May 1st, 2024, 1:38 pm ] |
Post subject: | Re: Transfer box.. A new version... |
Now need to have the splines wire cut and to drill th 4 holes... |
Page 4 of 7 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |