International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
EPB Refurb http://www.international2cvfriends.com/forum/viewtopic.php?f=19&t=6413 |
Page 6 of 8 |
Author: | subarupete [ October 3rd, 2022, 12:58 pm ] |
Post subject: | Re: EPB Refurb |
Inside Dash and propshaft tunnel etc Prop tunnel is fabricated from Alu, saved about 8kg from the orginal heavy steel version, coved with thin carpet to reduce sound/resonce. Extra panel for USB, Diesel Heater Control, Map Light, Reverse lamp, Alu Lever is the rear brake line lock valve. Speedo from a Quad with small speed sensor (no need for a 2.5 meter speedo cable from the rear diff) Citroen switches/ and relays and lamps with LEDs fitted. |
Author: | subarupete [ October 18th, 2022, 5:26 pm ] |
Post subject: | Re: EPB Refurb |
Still got a long list but jobs are smaller.. |
Author: | subarupete [ November 8th, 2022, 11:03 am ] |
Post subject: | Re: EPB Refurb |
Current state |
Author: | Roger V [ November 8th, 2022, 1:57 pm ] |
Post subject: | Re: EPB Refurb |
Shiney |
Author: | subarupete [ December 3rd, 2022, 3:09 pm ] |
Post subject: | Re: EPB Refurb |
Cylinder Heads. Exhaust Vales ok. Inlets to much wear, so new items. Using my £10 dial guage (Car Boot) Tubes fitted with rawl plug M8 (have made a more robust tool.) Also M8 exhaust studs the old M7 studs very rusty. Head on left after Vapour Blast My bargin crank from ebay in 2014 is a very large door stop |
Author: | Roger V [ December 3rd, 2022, 11:10 pm ] |
Post subject: | Re: EPB Refurb |
Who did vapour blast? |
Author: | subarupete [ December 4th, 2022, 10:32 am ] |
Post subject: | Re: EPB Refurb |
MTP Services Unit 1, Ladygrove Business Park Mitcheldean Gloucestershire GL17 0DS Cylinder heads £25 ! |
Author: | Roger V [ December 4th, 2022, 5:54 pm ] |
Post subject: | Re: EPB Refurb |
I don't like spending money on things like that How much better will it make it run? |
Author: | subarupete [ December 4th, 2022, 7:48 pm ] |
Post subject: | Re: EPB Refurb |
Parts need to be cleaned before they are machined also allows any cracks or defects to be seen. |
Author: | Roger V [ December 4th, 2022, 8:22 pm ] |
Post subject: | Re: EPB Refurb |
valid point I just shove it in |
Page 6 of 8 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |