International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
EPB Refurb http://www.international2cvfriends.com/forum/viewtopic.php?f=19&t=6413 |
Page 2 of 8 |
Author: | subarupete [ June 14th, 2022, 6:58 pm ] |
Post subject: | Re: EPB Refurb |
Was Recommend a VGS 720cc big bore kit, purchased from Belguim, and Brexshit caused payment extra on import!, with luck can reclaim the Belgium vat. Both the crankcase and heads need some milling… Busy painting the body at the moment with Craftmaster.. |
Author: | Roger V [ June 14th, 2022, 8:10 pm ] |
Post subject: | Re: EPB Refurb |
720 will be nice can you do the milling yourself? |
Author: | subarupete [ June 14th, 2022, 9:32 pm ] |
Post subject: | Re: EPB Refurb |
Need to see if the parts can fit in my milling machine? |
Author: | subarupete [ June 25th, 2022, 8:40 am ] |
Post subject: | Re: EPB Refurb |
Ready for Milling.. |
Author: | Roger V [ June 26th, 2022, 1:09 pm ] |
Post subject: | Re: EPB Refurb |
how much needs machining out? |
Author: | subarupete [ June 26th, 2022, 8:23 pm ] |
Post subject: | Re: EPB Refurb |
The bigger barrels need 4mm that’s quite a lot when you look at them. Crankcase is easier? But for the heads it has to be offset to miss the pushrods tubes. Will post before and after pics |
Author: | subarupete [ June 27th, 2022, 7:08 pm ] |
Post subject: | Re: EPB Refurb |
New fuel sender and better fuel pick up fitted to tank . Tank fitted and tunnel fitted. |
Author: | subarupete [ June 30th, 2022, 3:16 pm ] |
Post subject: | Re: EPB Refurb |
Body now back on the chassis. |
Author: | rob massey55 [ June 30th, 2022, 8:37 pm ] |
Post subject: | Re: EPB Refurb |
Serious stuff |
Author: | Roger V [ June 30th, 2022, 8:53 pm ] |
Post subject: | Re: EPB Refurb |
I am a bear of very little brain, so to much for me, Pass the cider please |
Page 2 of 8 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |