International2cvFriends.com
http://www.international2cvfriends.com/forum/

EPB Refurb
http://www.international2cvfriends.com/forum/viewtopic.php?f=19&t=6413
Page 1 of 8

Author:  subarupete [ May 5th, 2022, 3:27 pm ]
Post subject:  EPB Refurb

Hi All,
Out of Hibernation and with no risk of Frostbite back to cleaning, painting hubs/driveshafts and new Gators. Like squirrel where did I conceal all the parts?
Attachment:
shaft.jpg
shaft.jpg [ 926.08 KiB | Viewed 21619 times ]

Attachment:
hub.jpg
hub.jpg [ 887.11 KiB | Viewed 21619 times ]

Author:  jasu [ May 10th, 2022, 10:16 am ]
Post subject:  Re: EPB Refurb

subarupete wrote:
Like squirrel where did I conceal all the parts?

I know that feeling. Really, can't understand how much can be forgotten, but in the other hand, a lot of great surprises comes when "finding" all the stuff again what wasn't remember even seen before, butwhen seeing again just recall "i must have seen them before, some day"...

Waiting to see what will become of these, and rest of the parts... :D

Author:  subarupete [ May 26th, 2022, 1:08 pm ]
Post subject:  Re: EPB Refurb

Gearbox after Vapour Blasting.
Now just to reassemble it!
Attachment:
44C99D6D-605E-4A9D-8AD2-76843FF8826C.jpeg
44C99D6D-605E-4A9D-8AD2-76843FF8826C.jpeg [ 502.56 KiB | Viewed 21346 times ]

Author:  Roger V [ May 26th, 2022, 10:17 pm ]
Post subject:  Re: EPB Refurb

what is an EPB?

Author:  subarupete [ May 27th, 2022, 10:52 am ]
Post subject:  Re: EPB Refurb

Attachment:
559798DD-C0FA-4902-8892-30B5CABA3180.jpeg
559798DD-C0FA-4902-8892-30B5CABA3180.jpeg [ 551.35 KiB | Viewed 21325 times ]


Abbreviation of Exceeds Planned Budget

Author:  Roger V [ May 27th, 2022, 12:16 pm ]
Post subject:  Re: EPB Refurb

Well! if your going to build it up-side-down, I'm not surprised!

Author:  subarupete [ May 27th, 2022, 1:15 pm ]
Post subject:  Re: EPB Refurb

:lol:

Author:  subarupete [ June 8th, 2022, 3:30 pm ]
Post subject:  Re: EPB Refurb

Last stages of gearbox assembly, :D only to notice it has the incorrect 3rd gear in situ!
Now to disassemble…reassemble again, but now I know where all the bits go.
.
Attachment:
FF2D9AB5-3A1D-480C-8B39-39FF7C62F3C8.jpeg
FF2D9AB5-3A1D-480C-8B39-39FF7C62F3C8.jpeg [ 291.33 KiB | Viewed 21175 times ]


Attachment:
601BDBE5-1865-46C2-9C86-4912930C2C2C.jpeg
601BDBE5-1865-46C2-9C86-4912930C2C2C.jpeg [ 265.69 KiB | Viewed 21175 times ]

Author:  subarupete [ June 14th, 2022, 2:57 pm ]
Post subject:  Re: EPB Refurb

When the cylinder heads are machined for the larger bore barrels the push rod tube have to be cut out…
Spent £18 on some tube and 1 hour on the lathe to make 4…

Attachment:
FE77F944-E811-400A-9005-7C9A53C31ED6.jpeg
FE77F944-E811-400A-9005-7C9A53C31ED6.jpeg [ 277.87 KiB | Viewed 21035 times ]

Author:  Roger V [ June 14th, 2022, 5:29 pm ]
Post subject:  Re: EPB Refurb

What are the plans for the engine?

Page 1 of 8 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/