| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Long term project, Dyane4x4 http://www.international2cvfriends.com/forum/viewtopic.php?f=19&t=5823 |
Page 13 of 16 |
| Author: | jasu [ February 9th, 2019, 10:37 pm ] |
| Post subject: | Re: Long term project, Dyane4x4 |
rob massey55 wrote: Spaghetti anyone?  Only some more wires than original? One for points, two for dynamo and thats all. Now, two for alternator, over 20 for IE, even speedo has three wires on gearbox... But why? No need, only because it is possible. And this is some kind of hobby... |
|
| Author: | Roger V [ February 10th, 2019, 12:03 pm ] |
| Post subject: | Re: Long term project, Dyane4x4 |
But I like the pretty colours. 
|
|
| Author: | jasu [ February 11th, 2019, 9:43 pm ] |
| Post subject: | Re: Long term project, Dyane4x4 |
 Yesterday connected only couple vires, too much something else with life... Today, almost whole day with wiring...  Everything cut to proper lenght, hope everything works and nothing forgotten... And then testing, all works, no smoke find other than exhaust. The engine has run about 18 months ago...  all looks to work, so time to hide nice coloured wires...   And, after taped all wires, just remembered the windscreen washer pump hasn't power. So, now it has constant supply, there was unused supply near washer pump... Maybe some test drive tomorrow, with doors at least at front installed... |
|
| Author: | Roger V [ February 11th, 2019, 9:57 pm ] |
| Post subject: | Re: Long term project, Dyane4x4 |
Aw ... pretty colours gone 
|
|
| Author: | jasu [ February 12th, 2019, 9:18 pm ] |
| Post subject: | Re: Long term project, Dyane4x4 |
Yes, it works. Only non-working is horn, because I forgot it when swapped engine, it is still on supercharged engine... Only -7'C outside, everything frozen, at garage 20 degrees warmer, nice... |
|
| Author: | jasu [ February 18th, 2019, 5:15 pm ] |
| Post subject: | Re: Long term project, Dyane4x4 |
Oh God, here it goes again...   Just couldn't resist myself... 
|
|
| Author: | lpgo [ February 18th, 2019, 8:22 pm ] |
| Post subject: | Re: Long term project, Dyane4x4 |
ok. I like this one.. Central doorlocking.. With remote control?? |
|
| Author: | jasu [ February 18th, 2019, 8:51 pm ] |
| Post subject: | Re: Long term project, Dyane4x4 |
lpgo wrote: ok. I like this one.. Central doorlocking.. With remote control?? Yes, some day. As I have had on my other Dyane near 20 years. When I build that, it was very surprising to other car drivers, many of them didn't believe their eyes/ears when I locked/unlocked that... No key entry on front doors, must have reliable remote system... |
|
| Author: | AZL57 [ February 18th, 2019, 11:45 pm ] |
| Post subject: | Re: Long term project, Dyane4x4 |
or a glasshammer...
|
|
| Author: | jasu [ March 28th, 2019, 11:04 pm ] |
| Post subject: | Re: Long term project, Dyane4x4 |
Started to replace the fan...   Little explosion at ice track. Old fan didn't like a long session over 6000 RPM...   Maybe need to remove cooling ducts, to get all plastic parts out there..?  A new fan installed to pulley. And tried to put it back, but from some reason, fan blades hit the shroud. The fan os from MCC, does someone have had same situation? Need to measure the diameter, compare to another fan blade that is on the supercharged engine..? Sadly that was enough for today, hard to try to make almost anything, because I slipped on ice on backyard some weeks ago, and hit my head hard to ice. With former injury, a new hit makes more damage much easier... |
|
| Page 13 of 16 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|