Error or What!
Trigger wheel in Alu, can it be used with a VR, Hall Sensor or other? or are they (s)crap
Attachment:
abs.jpg [ 311.18 KiB | Viewed 4811 times ]
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Trigger Wheel/ABS Wheel http://www.international2cvfriends.com/forum/viewtopic.php?f=19&t=4242 |
Page 1 of 1 |
| Author: | subarupete [ September 21st, 2012, 4:05 pm ] |
| Post subject: | Trigger Wheel/ABS Wheel |
Error or What! Trigger wheel in Alu, can it be used with a VR, Hall Sensor or other? or are they (s)crap Attachment: abs.jpg [ 311.18 KiB | Viewed 4811 times ] |
|
| Author: | lpgo [ September 21st, 2012, 10:16 pm ] |
| Post subject: | Re: Trigger Wheel/ABS Wheel |
Homemade triggerwheel 36-1 (for ignition) with my famous Vr sensor works well for me http://www.youtube.com/watch?v=7BFBOltFBaQ&feature=plcp butI think for ABS/tractioncontrol you better can use Hall (zero detecttion) meaning Hall sensor works from 0 rpm Vr sensor runs from 60 rpm (at least in my ignition 1 tooth) 36 tooth will be less then 60 rpm but never 0.... |
|
| Author: | lpgo [ September 21st, 2012, 10:18 pm ] |
| Post subject: | Re: Trigger Wheel/ABS Wheel |
I would make it simpler drilling/milling holes into the disk... |
|
| Author: | subarupete [ September 22nd, 2012, 9:30 am ] |
| Post subject: | Re: Trigger Wheel/ABS Wheel |
Lpgo The material Aluminium will thats work??? All the commercial items are steel/ferrous. |
|
| Author: | lpgo [ September 22nd, 2012, 9:46 am ] |
| Post subject: | Re: Trigger Wheel/ABS Wheel |
No, it need to be atracked！！！！ by a magnet, at least for a vr sensor, some hall sensors do but i think they don.t work well in this case, again drill/mill a pattern in your disks.. |
|
| Author: | subarupete [ September 22nd, 2012, 1:15 pm ] |
| Post subject: | Re: Trigger Wheel/ABS Wheel |
With it now,  ps its "Disc" pps no milling machine |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|