| Author |
Message |
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2142
Location: Near Monmouth
|
 Trigger Wheel/ABS Wheel Error or What! Trigger wheel in Alu, can it be used with a VR, Hall Sensor or other? or are they (s)crap  Attachment:
abs.jpg [ 311.18 KiB | Viewed 4695 times ]
|
| September 21st, 2012, 4:05 pm |
|
|
|
lpgo
Firing on 1-2 Spark
Joined: November 8th, 2009, 5:42 pm
Posts: 2846
Location: NL
|
Re: Trigger Wheel/ABS Wheel Homemade triggerwheel 36-1 (for ignition) with my famous Vr sensor works well for me http://www.youtube.com/watch?v=7BFBOltFBaQ&feature=plcpbutI think for ABS/tractioncontrol you better can use Hall (zero detecttion) meaning Hall sensor works from 0 rpm Vr sensor runs from 60 rpm (at least in my ignition 1 tooth) 36 tooth will be less then 60 rpm but never 0....
_________________
Russell wrote: Hi Geo,
you've been one of the sites biggest attractions in recent years.
Russ
|
| September 21st, 2012, 10:16 pm |
|
|
|
lpgo
Firing on 1-2 Spark
Joined: November 8th, 2009, 5:42 pm
Posts: 2846
Location: NL
|
Re: Trigger Wheel/ABS Wheel I would make it simpler drilling/milling holes into the disk...
_________________
Russell wrote: Hi Geo,
you've been one of the sites biggest attractions in recent years.
Russ
|
| September 21st, 2012, 10:18 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2142
Location: Near Monmouth
|
Re: Trigger Wheel/ABS Wheel Lpgo
The material Aluminium will thats work???
All the commercial items are steel/ferrous.
|
| September 22nd, 2012, 9:30 am |
|
|
|
lpgo
Firing on 1-2 Spark
Joined: November 8th, 2009, 5:42 pm
Posts: 2846
Location: NL
|
Re: Trigger Wheel/ABS Wheel No, it need to be atracked！！！！ by a magnet, at least for a vr sensor, some hall sensors do but i think they don.t work well in this case, again drill/mill a pattern in your disks..
_________________
Russell wrote: Hi Geo,
you've been one of the sites biggest attractions in recent years.
Russ
|
| September 22nd, 2012, 9:46 am |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2142
Location: Near Monmouth
|
Re: Trigger Wheel/ABS Wheel With it now,  ps its "Disc" pps no milling machine
|
| September 22nd, 2012, 1:15 pm |
|
|
