Hydraulics almost complete, waiting for feed hose and some connectors.
More pipes than a JCB:)
Attachment:
P1000556.jpg [ 308.28 KiB | Viewed 5393 times ]
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Make Your Own ....2CV.... 4x4 http://www.international2cvfriends.com/forum/viewtopic.php?f=19&t=3279 |
Page 96 of 105 |
| Author: | subarupete [ September 5th, 2019, 1:05 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Hydraulics almost complete, waiting for feed hose and some connectors. More pipes than a JCB:) Attachment: P1000556.jpg [ 308.28 KiB | Viewed 5393 times ] |
|
| Author: | AZL57 [ September 6th, 2019, 8:24 am ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
A DS would be jealous... 
|
|
| Author: | subarupete [ September 6th, 2019, 9:50 am ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
@AZL 57  Some info... A guy in Spain?, used the C5 pump to replace his engine driven LHM pump. LHM and LDS are similar, but cant be mixed. I will see if I can find the site again |
|
| Author: | subarupete [ September 8th, 2019, 2:42 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
The "Beast" rises again. Attachment: P1000557.jpg [ 359.57 KiB | Viewed 5354 times ] Must be the sunny weather 
|
|
| Author: | subarupete [ September 10th, 2019, 9:04 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Bit of video. https://youtu.be/RoqwcT95QPM |
|
| Author: | Geert [ September 11th, 2019, 7:43 am ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
I like it ! What is next ? |
|
| Author: | lpgo [ September 11th, 2019, 10:19 am ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Geert wrote: I like it ! What is next ? Home made diff-locks... |
|
| Author: | subarupete [ September 11th, 2019, 11:32 am ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Internal lock on a GS box very hard. External lock (chain type) hard and they get covered in non lubricating stuff. At the moment. It jumps out of low ratio. Brakes need bleeding ???? Many holes in the rear floor. Rear floors @lpgo COP Coil Resistance ? |
|
| Author: | AZL57 [ September 11th, 2019, 4:54 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Have seen an external locking dif system with an axle on top of the gear box with two v-belts to the driveshafts. If the force is very heavy they will slip in the pulleys. I think this was on an Lohr fardier. |
|
| Author: | ken [ September 12th, 2019, 12:23 am ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
AZL, it certainly would have been. A very simple and effective setup, or so I thought when I first saw one. That was on a beach near Mimizan, being used by lifeguards... . AZL57 wrote: Have seen an external locking dif system with an axle on top of the gear box with two v-belts to the driveshafts. If the force is very heavy they will slip in the pulleys. I think this was on an Lohr fardier. |
|
| Page 96 of 105 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|