View unanswered posts | View active topics It is currently February 17th, 2020, 5:15 pm



Reply to topic  [ 968 posts ]  Go to page Previous  1 ... 92, 93, 94, 95, 96, 97  Next
 Make Your Own ....2CV.... 4x4 
Author Message
Online
Firing on two.
User avatar

Joined: March 5th, 2009, 6:23 pm
Posts: 1818
Location: Near Monmouth
Post Re: Make Your Own ....2CV.... 4x4
Wiring in the Car.

Attachment:
P1000508.jpg
P1000508.jpg [ 350.58 KiB | Viewed 1520 times ]


Wiring under the Bonnet.

Attachment:
P1000509.jpg
P1000509.jpg [ 371.6 KiB | Viewed 1520 times ]


Wiring ToDo Basics.
Headlamps, Side, Indicators, Horn.
New Battery +VE and connections to main loom.
Extras bits +++.


July 16th, 2019, 1:23 pm
Profile
Online
Firing on two.
User avatar

Joined: March 5th, 2009, 6:23 pm
Posts: 1818
Location: Near Monmouth
Post Re: Make Your Own ....2CV.... 4x4
Fuel Tank Fitted.

Base is bolted to the floor and to the inner wing.

Attachment:
P1000510.jpg
P1000510.jpg [ 284.05 KiB | Viewed 1482 times ]


July 23rd, 2019, 5:48 pm
Profile
Online
Firing on two.
User avatar

Joined: March 5th, 2009, 6:23 pm
Posts: 1818
Location: Near Monmouth
Post Re: Make Your Own ....2CV.... 4x4
New main gearbox lever and try out for the Transfer box lever, new mount to be fabricated.


Attachment:
P1000529.jpg
P1000529.jpg [ 310.81 KiB | Viewed 1328 times ]


Revised shift pattern

Attachment:
P1000535.jpg
P1000535.jpg [ 143.5 KiB | Viewed 1328 times ]



Transfer box end of gear lever.

Attachment:
P1000533.jpg
P1000533.jpg [ 316.78 KiB | Viewed 1328 times ]


August 19th, 2019, 3:21 pm
Profile
Online
Firing on two.
User avatar

Joined: March 5th, 2009, 6:23 pm
Posts: 1818
Location: Near Monmouth
Post Re: Make Your Own ....2CV.... 4x4
Gear Lever (Scratch Head Moment's)

Transfer box new lever.
Now vertical, needs sanding and paint.

Attachment:
P1000536.jpg
P1000536.jpg [ 311.37 KiB | Viewed 1316 times ]


Attachment:
P1000537.jpg
P1000537.jpg [ 323.24 KiB | Viewed 1316 times ]



Lever End.

Mount for the lever and linkage that doesn't interfere with the seats or the seat rails

Attachment:
P1000539.jpg
P1000539.jpg [ 236.62 KiB | Viewed 1316 times ]


August 20th, 2019, 3:15 pm
Profile
Online
Firing on two.
User avatar

Joined: March 5th, 2009, 6:23 pm
Posts: 1818
Location: Near Monmouth
Post Re: Make Your Own ....2CV.... 4x4
Transfer box Lever.

Mounted to the same bit of chassis as the rear gear box support.
Need the nuts to be recessed as the foul the lever a bit.

Attachment:
P1000540.jpg
P1000540.jpg [ 242.75 KiB | Viewed 1299 times ]



Both ends now connected and it allows selection!


Attachment:
P1000543.jpg
P1000543.jpg [ 298.4 KiB | Viewed 1299 times ]


August 21st, 2019, 5:16 pm
Profile
Online
Firing on two.
User avatar

Joined: March 5th, 2009, 6:23 pm
Posts: 1818
Location: Near Monmouth
Post Re: Make Your Own ....2CV.... 4x4
Transfer Box new knob

Revised pattern due to the linkage used,

Attachment:
P1000546.jpg
P1000546.jpg [ 198.52 KiB | Viewed 1282 times ]


Final Mounting (famous last words)

Slot cut out to clear seat frame.

Attachment:
P1000544.jpg
P1000544.jpg [ 235.55 KiB | Viewed 1282 times ]


August 22nd, 2019, 3:34 pm
Profile
Firing on 1-2 Spark
User avatar

Joined: November 8th, 2009, 5:42 pm
Posts: 2795
Location: NL
Post Re: Make Your Own ....2CV.... 4x4
I.m still not sure which way round..
Design follows function or function follows design...


Hmmmmm...

Well the result is looking awsome.. (at least in my eyes).

_________________
Russell wrote:
Hi Geo,
you've been one of the sites biggest attractions in recent years.
Russ


August 22nd, 2019, 4:46 pm
Profile WWW
Online
Firing on two.
User avatar

Joined: March 5th, 2009, 6:23 pm
Posts: 1818
Location: Near Monmouth
Post Re: Make Your Own ....2CV.... 4x4
Thanks Geo,

Hope to test it on the road (track) soon.

Need to fix the LDS pump/pipes/wiring for the suspension so it has some damping, at the moment the rear is like a Kangaroo.

Had is running a number of times, vibrates as the engine mounts are (through)bolted, when I carefully engage the clutch, more vibration from the extra shaft :( , gave it lots of revs and it has stayed together :)


August 22nd, 2019, 5:56 pm
Profile
Online
Firing on two.
User avatar

Joined: March 5th, 2009, 6:23 pm
Posts: 1818
Location: Near Monmouth
Post Re: Make Your Own ....2CV.... 4x4
Tight fit for gear lever.

Attachment:
P1000549.jpg
P1000549.jpg [ 198.48 KiB | Viewed 1210 times ]


Support for LDS tank.

Attachment:
P1000548.jpg
P1000548.jpg [ 269.89 KiB | Viewed 1210 times ]


August 29th, 2019, 6:04 pm
Profile
Firing on two.

Joined: December 21st, 2014, 7:33 pm
Posts: 678
Location: Rhayader Mid Wales
Post Re: Make Your Own ....2CV.... 4x4
Well it's not like you'll be racing through the gears :)
Loving this build 8-)


August 29th, 2019, 6:45 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 968 posts ]  Go to page Previous  1 ... 92, 93, 94, 95, 96, 97  Next

Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.