Steering Rack Adjusted and re-fitted.
Attachment:
P1000473.jpg [ 322.51 KiB | Viewed 5663 times ]
Attempt at a Containment Guard.
Attachment:
P1000472.jpg [ 287.29 KiB | Viewed 5663 times ]
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Make Your Own ....2CV.... 4x4 http://www.international2cvfriends.com/forum/viewtopic.php?f=19&t=3279 |
Page 93 of 105 |
| Author: | subarupete [ May 23rd, 2019, 12:29 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
No, its located at the bottom on the rack, thus the pain of extraction! |
|
| Author: | subarupete [ June 1st, 2019, 11:31 am ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Steering Rack Adjusted and re-fitted. Attachment: P1000473.jpg [ 322.51 KiB | Viewed 5663 times ] Attempt at a Containment Guard. Attachment: P1000472.jpg [ 287.29 KiB | Viewed 5663 times ] |
|
| Author: | subarupete [ June 20th, 2019, 2:30 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Re-Design aka cock-up. This bearing only gets oil by splash, hopefully. Attachment: P1000481.jpg [ 190.78 KiB | Viewed 5556 times ] Added Oil Feed to rear cover (left hand pic) Attachment: P1000482.jpg [ 184.14 KiB | Viewed 5556 times ] |
|
| Author: | subarupete [ July 1st, 2019, 5:49 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Engine and Gearbox Re-fitted  Now need to find the Ignition Coil  Attachment: P1000488.jpg [ 377.95 KiB | Viewed 5482 times ] |
|
| Author: | subarupete [ July 4th, 2019, 12:10 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Found the Ignition Coil .Previously mounted the coil on the gearbox, but thats a bit limited for space and possible heat from the exhaust. Attachment: P1000490.jpg [ 250.63 KiB | Viewed 5446 times ] Now mounted beneath the standard Air Filter. Attachment: P1000489.jpg [ 279.05 KiB | Viewed 5446 times ] Using Standard 2CV front seats. (Thanks Roger) Bit of a squeeze to fit the inner runner... Attachment: P1000491.jpg [ 311.95 KiB | Viewed 5446 times ] |
|
| Author: | rob massey55 [ July 4th, 2019, 5:39 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
ooh! it's all coming together 
|
|
| Author: | lpgo [ July 4th, 2019, 7:19 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Please take care with the coil right on top of the Rpm sensor of 1-2-Spark. The magnetic field from the coil can interfare with the sensor giving bad rpm reading.. Just be warned.. |
|
| Author: | subarupete [ July 4th, 2019, 7:39 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Feedback is welcome. |
|
| Author: | Roger V [ July 6th, 2019, 12:31 am ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Hey, nice seat 
|
|
| Author: | lpgo [ July 6th, 2019, 9:20 am ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Roger V wrote: Hey, nice seat Had to think it over but now I know..... They where yours.. Ofcourse... |
|
| Page 93 of 105 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|