What do you mean I need therapy! This is the therapy.
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Make Your Own ....2CV.... 4x4 http://www.international2cvfriends.com/forum/viewtopic.php?f=19&t=3279 |
Page 76 of 105 |
| Author: | Roger V [ May 22nd, 2017, 12:40 am ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
What do you mean I need therapy! This is the therapy.
|
|
| Author: | subarupete [ May 24th, 2017, 11:55 am ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Engine/Gearbox Mounts. The bolt through the middle is a good solution, however off-roading seems to bend most things. The right hand items is from the front diff, left-hand item is a solution(half-done). Attachment: IMG_0966.jpg [ 290.85 KiB | Viewed 4044 times ] |
|
| Author: | AZL57 [ May 25th, 2017, 8:14 am ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
is it not bend by thightening? |
|
| Author: | subarupete [ May 25th, 2017, 9:17 am ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
@AZL. Was careful to just tighten the nut/bolt enough. Here's the "twisted" bracket it was mounted on. Attachment: IMG_0973.jpg [ 83.76 KiB | Viewed 4018 times ] |
|
| Author: | subarupete [ May 25th, 2017, 2:20 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
The plan is coming together?. The stumpy differential (gearbox) used at the front now becomes the rear diff. Revised mounts at both ends and have trimmed off and improved the front and rear plates. Also hopefully cured the oil weep by the drive flange. ps Thanks to Joolz for the idea of using Transit Shock bushes. Attachment: IMG_0974.jpg [ 416.01 KiB | Viewed 4009 times ] Attachment: IMG_0975.jpg [ 424.45 KiB | Viewed 4009 times ] |
|
| Author: | subarupete [ May 30th, 2017, 1:17 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Rear Suspension. To stop the excessive "ROLL", going to fit coil overs struts to the rear suspension, same as the front suspension. I plan to make a frame, that bolts to the chassis, with holes (Gaps) in the rear floor. The frame will be mounted after the body has been fitted to the chassis. Lot of measuring and try outs photo's show one side of the rear setup. Don't think a standard rear seat will fit even with the struts canted to the rear. Attachment: IMG_1014.jpg [ 435.08 KiB | Viewed 3985 times ] Attachment: IMG_1015.jpg [ 436.62 KiB | Viewed 3985 times ] Attachment: IMG_1016.jpg [ 460.75 KiB | Viewed 3985 times ] |
|
| Author: | subarupete [ June 10th, 2017, 12:55 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Rear Suspension. Have pretty much got the spacings for the Rear Springs and also the static ride height figured out.  Need to weld up the lower springs mount on the struts. The frame is just bolted to the chassis. Attachment: IMG_1087.jpg [ 419.9 KiB | Viewed 3938 times ] Attachment: IMG_1088.jpg [ 380.8 KiB | Viewed 3938 times ] |
|
| Author: | subarupete [ June 16th, 2017, 1:27 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Progress seems to be happening as I have now started to paint stuff, ran out of the other colours so used some Myford green. Rear Strut almost complete. Attachment: IMG_1101.jpg [ 343.59 KiB | Viewed 3907 times ] |
|
| Author: | ken [ June 16th, 2017, 6:00 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Almost there...  http://www.bing.com/images/search?view= ... ajaxhist=0 |
|
| Author: | subarupete [ June 16th, 2017, 8:08 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
 Thanks Ken
|
|
| Page 76 of 105 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|