| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Make Your Own ....2CV.... 4x4 http://www.international2cvfriends.com/forum/viewtopic.php?f=19&t=3279 |
Page 69 of 105 |
| Author: | jasu [ December 4th, 2016, 12:43 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
lpgo wrote: Honnestly Jasu,I think you did a great job here but; you can't compare your car with Pete's.. Yes, I know. But I put that only because of fun. And I know Pete's 4x4 is built for offroad use, and mine is for everyday winter use... Can't compare, practically any other way, than both are 4x4 and has 602cc engine...  But the bottle of whisky... |
|
| Author: | lpgo [ December 4th, 2016, 2:49 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
jasu wrote: But the bottle of whisky... Jasu. The clue here is that I don.t like alcohol at all. about the only alcohol I drink is a glass of Whiskey every 2 years at the 2cv WM with Mark 4x4. I only challenged Pete to build it as light as possible.. Which he did.. Well sort off.. |
|
| Author: | jasu [ December 4th, 2016, 3:26 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
lpgo wrote: jasu wrote: But the bottle of whisky... Jasu. The clue here is that I don.t like alcohol at all. about the only alcohol I drink is a glass of Whiskey every 2 years at the 2cv WM with Mark 4x4. I only challenged Pete to build it as light as possible.. Which he did.. Well sort off.. Yes, same with me. About ten years without, only some cl whisky or cognac in every other year. Before that, drunk plenty but not anymore... |
|
| Author: | AZL57 [ December 19th, 2016, 9:40 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Geo you forgot the beer in Troyes... 
|
|
| Author: | subarupete [ January 10th, 2017, 11:21 am ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Cold weather, Very bad Flu/Cough have kept me inactive  But some bits have been done.. Output Flange. Attachment: Output_Flangetitled.jpg [ 359.08 KiB | Viewed 3153 times ] Transfer Gear. Attachment: Gear_Splined.jpg [ 540.87 KiB | Viewed 3153 times ] |
|
| Author: | subarupete [ January 16th, 2017, 2:15 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
As the saying goes.... Measure Twice, Cut Once! About to embark on marking out the new back plate, for the front diff, together with the transfer shaft for the gearbox. Attachment: DSC00574.jpg [ 246.45 KiB | Viewed 3118 times ] |
|
| Author: | subarupete [ January 20th, 2017, 4:11 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Ebay again.. Found a Kawasaki GT550 prop shaft (x2), good for 9000 rpm. The two shafts joined together with a UJ at each end will connect to the remote 4 speed gearbox. Attachment: DSC00556.jpg [ 235.11 KiB | Viewed 3092 times ] |
|
| Author: | subarupete [ January 27th, 2017, 6:15 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
Back Plate progressing With Shafts/Gears. Attachment: DSC00612.jpg [ 254 KiB | Viewed 3057 times ] Cut to size (approx) Attachment: DSC00620.jpg [ 225.53 KiB | Viewed 3057 times ] |
|
| Author: | Ianredspecial [ January 28th, 2017, 11:23 am ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
This stuff is properly amazing. |
|
| Author: | subarupete [ January 28th, 2017, 2:08 pm ] |
| Post subject: | Re: Make Your Own ....2CV.... 4x4 |
|
|
| Page 69 of 105 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|