International2cvFriends.com
http://www.international2cvfriends.com/forum/

Make Your Own ....2CV.... 4x4
http://www.international2cvfriends.com/forum/viewtopic.php?f=19&t=3279
Page 102 of 104

Author:  subarupete [ October 2nd, 2020, 8:52 am ]
Post subject:  Re: �Make Your Own ....2CV.... 4x4

Wires and exhaust don’t mix, will use an Ally channel to keep it tidy.

May wrap the exhaust when,,,, if it works all ok.

Author:  subarupete [ October 3rd, 2020, 2:39 pm ]
Post subject:  Re: �Make Your Own ....2CV.... 4x4

When the suspension drops, the springs wanted to come out of the spring tube, so they need a plate to keep them in situ.
Attachment:
63A83646-F30B-4DD7-9396-E83522A0A745.jpeg
63A83646-F30B-4DD7-9396-E83522A0A745.jpeg [ 294.35 KiB | Viewed 486 times ]

Author:  subarupete [ October 7th, 2020, 4:42 pm ]
Post subject:  Re: �Make Your Own ....2CV.... 4x4

Shiny new carb, from EBay was remmended and 1/2 price, time will tell.

Attachment:
5F4C6140-F1B3-44D8-ACF0-A6A73276E339.jpeg
5F4C6140-F1B3-44D8-ACF0-A6A73276E339.jpeg [ 425.23 KiB | Viewed 432 times ]



Suspension at full droop.
Attachment:
694A24D3-DF9D-49B7-B46A-FFD09A424817.jpeg
694A24D3-DF9D-49B7-B46A-FFD09A424817.jpeg [ 437.96 KiB | Viewed 432 times ]



Suspension static load, abandoned the top plate in the spring can as it collides with the ram oil feed.

Attachment:
61C07D0F-7C2D-4FA5-9E47-4C98BB614ED8.jpeg
61C07D0F-7C2D-4FA5-9E47-4C98BB614ED8.jpeg [ 418.54 KiB | Viewed 432 times ]

Author:  subarupete [ October 10th, 2020, 2:54 pm ]
Post subject:  Re: �Make Your Own ....2CV.... 4x4

Still an A4 list of things to do, mostly assembling, figuring out the wiring few brackets to weld...

Attachment:
8AFC2CD9-58D9-46D5-A8A4-113560831578.jpeg
8AFC2CD9-58D9-46D5-A8A4-113560831578.jpeg [ 438.11 KiB | Viewed 389 times ]

Author:  subarupete [ October 17th, 2020, 2:37 pm ]
Post subject:  Re: �Make Your Own ....2CV.... 4x4

First start in a longtime, didn’t go well as water in the bottom of the tank, due to ethanol maybe?
Anyway after numerous fiddling, lighter fuel in the carb, took out the glass in line filter was leaking well, not good with the lpg heater nearby, the car runs well just static and now ticks over nicely.
Pumped up the tyres, need to remove all the stuff from inside to give it a driveway test!!

Author:  jasu [ October 17th, 2020, 3:34 pm ]
Post subject:  Re: �Make Your Own ....2CV.... 4x4

subarupete wrote:
need to remove all the stuff from inside to give it a driveway test!!

You too? "A temporary storage", the car You don't use for a while..?

Too easy to put stuff inside on any car what is standing still for longer than a week. Where all these stuff comes, can't say for sure, but anyway, there is always some extra stuff after some period...

Author:  Roger V [ October 17th, 2020, 7:00 pm ]
Post subject:  Re: �Make Your Own ....2CV.... 4x4

It kinda creeps up on you doesnt it!

Actually, this just me over loading the shed to take stuff to recycling. :)
I got some funny looks from motorway police patrols. :D

And a wave from a blood bike ...

Attachments:
File comment: Wood inside and outside :)
20201017_172624.jpg
20201017_172624.jpg [ 1.34 MiB | Viewed 315 times ]

Author:  subarupete [ October 18th, 2020, 8:59 am ]
Post subject:  Re: �Make Your Own ....2CV.... 4x4

Looks like you have been busy at IKEA. ;)

Author:  AZL57 [ October 18th, 2020, 4:07 pm ]
Post subject:  Re: �Make Your Own ....2CV.... 4x4

no they are original shed spare parts... ;-)

Author:  Roger V [ October 18th, 2020, 4:26 pm ]
Post subject:  Re: �Make Your Own ....2CV.... 4x4

I get my spares from Wickes!

Page 102 of 104 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/