When the suspension drops, the springs wanted to come out of the spring tube, so they need a plate to keep them in situ.
Attachment:
63A83646-F30B-4DD7-9396-E83522A0A745.jpeg [ 294.35 KiB | Viewed 4479 times ]
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Make Your Own ....2CV.... 4x4 http://www.international2cvfriends.com/forum/viewtopic.php?f=19&t=3279 |
Page 102 of 105 |
| Author: | subarupete [ October 2nd, 2020, 8:52 am ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
Wires and exhaust don’t mix, will use an Ally channel to keep it tidy. May wrap the exhaust when,,,, if it works all ok. |
|
| Author: | subarupete [ October 3rd, 2020, 2:39 pm ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
When the suspension drops, the springs wanted to come out of the spring tube, so they need a plate to keep them in situ. Attachment: 63A83646-F30B-4DD7-9396-E83522A0A745.jpeg [ 294.35 KiB | Viewed 4479 times ] |
|
| Author: | subarupete [ October 7th, 2020, 4:42 pm ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
Shiny new carb, from EBay was remmended and 1/2 price, time will tell. Attachment: 5F4C6140-F1B3-44D8-ACF0-A6A73276E339.jpeg [ 425.23 KiB | Viewed 4425 times ] Suspension at full droop. Attachment: 694A24D3-DF9D-49B7-B46A-FFD09A424817.jpeg [ 437.96 KiB | Viewed 4425 times ] Suspension static load, abandoned the top plate in the spring can as it collides with the ram oil feed. Attachment: 61C07D0F-7C2D-4FA5-9E47-4C98BB614ED8.jpeg [ 418.54 KiB | Viewed 4425 times ] |
|
| Author: | subarupete [ October 10th, 2020, 2:54 pm ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
Still an A4 list of things to do, mostly assembling, figuring out the wiring few brackets to weld... Attachment: 8AFC2CD9-58D9-46D5-A8A4-113560831578.jpeg [ 438.11 KiB | Viewed 4382 times ] |
|
| Author: | subarupete [ October 17th, 2020, 2:37 pm ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
First start in a longtime, didn’t go well as water in the bottom of the tank, due to ethanol maybe? Anyway after numerous fiddling, lighter fuel in the carb, took out the glass in line filter was leaking well, not good with the lpg heater nearby, the car runs well just static and now ticks over nicely. Pumped up the tyres, need to remove all the stuff from inside to give it a driveway test!! |
|
| Author: | jasu [ October 17th, 2020, 3:34 pm ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
subarupete wrote: need to remove all the stuff from inside to give it a driveway test!! You too? "A temporary storage", the car You don't use for a while..? Too easy to put stuff inside on any car what is standing still for longer than a week. Where all these stuff comes, can't say for sure, but anyway, there is always some extra stuff after some period... |
|
| Author: | Roger V [ October 17th, 2020, 7:00 pm ] | ||
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 | ||
It kinda creeps up on you doesnt it! Actually, this just me over loading the shed to take stuff to recycling.  I got some funny looks from motorway police patrols.  And a wave from a blood bike ...
|
|||
| Author: | subarupete [ October 18th, 2020, 8:59 am ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
Looks like you have been busy at IKEA. 
|
|
| Author: | AZL57 [ October 18th, 2020, 4:07 pm ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
no they are original shed spare parts...
|
|
| Author: | Roger V [ October 18th, 2020, 4:26 pm ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
I get my spares from Wickes! |
|
| Page 102 of 105 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|