That's looking very neat!
| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Make Your Own ....2CV.... 4x4 http://www.international2cvfriends.com/forum/viewtopic.php?f=19&t=3279 |
Page 101 of 105 |
| Author: | Roger V [ September 10th, 2020, 6:37 pm ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
That's looking very neat!
|
|
| Author: | subarupete [ September 16th, 2020, 4:28 pm ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
Arm fitted in place... Attachment: arm2.jpg [ 758.47 KiB | Viewed 4791 times ] |
|
| Author: | lpgo [ September 16th, 2020, 5:12 pm ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
Great stuff, love it, cant wait to see it in action |
|
| Author: | subarupete [ September 20th, 2020, 3:14 pm ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
Maybe over engineered, but I’m happy.. The pressed steel end cover on the axle tube have never sealed properly. Had a spare bit of alloy plate which now does the job. Attachment: FD98A70E-BA44-4455-BCD3-C704066D3A49.jpeg [ 618.02 KiB | Viewed 4742 times ] |
|
| Author: | Roger V [ September 20th, 2020, 6:17 pm ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
Also keen on seeing this working Not that i understand it  Keep going
|
|
| Author: | subarupete [ September 22nd, 2020, 4:47 pm ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
Other side progressing.... Attachment: AE7B8254-8C80-4C2D-815D-A4F6F783463B.jpeg [ 457.54 KiB | Viewed 4698 times ] |
|
| Author: | subarupete [ September 24th, 2020, 1:45 pm ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
Engine and Gearbox Refitted !. However the drivers side of the suspension, is softer:( Either I have got some mismatched springs or the bottom mount of the strut is in the wrong place, perhaps out by 5mm ????. Will swap the struts over and see what happens. In addition, there are no shock absorbers(as such)on the front, will see when it eventually drives, as to how "kangaro" it is?. Will see how much damping is provided by the hydraulic rams. Then if its bad can either fit normal shock absorbers or I have axle tube that has the lugs for friction dampers. Attachment: P1000690 (1).jpg [ 279.17 KiB | Viewed 4663 times ] |
|
| Author: | subarupete [ October 1st, 2020, 1:55 pm ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
Progress to-date. To Do List. Weld drivers side strut mount. Get under the car to fasten Prop Shaft Bolts x4, Gearbox mounts x 4, very easy if you can bend:) Wiring, throttle cable, battery, Air Filter + other bits and then some unforeseen fettling???? Attachment: 0.jpg [ 165.09 KiB | Viewed 4566 times ] |
|
| Author: | AZL57 [ October 1st, 2020, 5:07 pm ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
Looks nice, keep the wires away from the exhausts. |
|
| Author: | Roger V [ October 2nd, 2020, 8:15 am ] |
| Post subject: | Re: �Make Your Own ....2CV.... 4x4 |
Are you going to wrap those exhaust, or stay with the shiney look?
|
|
| Page 101 of 105 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|