| Author |
Message |
|
Harley
Firing on two.
Joined: May 3rd, 2009, 11:40 am
Posts: 816
Location: Melbourne, Australia.
|
 Re: Make Your Own ....2CV.... 4x4 Thanks for the info guys,
The reason I am looking at a lower ratio is that I have 155/80 R15 tyres, and with the LNA gearbox it is really to long.
AlthoughI will be fitting the Visa engine some time... For slower climbing I think the lower ratio will be much better.
So practically, if i did get a custom crownwheel and pinion made, how difficult would it be to install in the gearbox?
It has been a while since I had the gearbox apart...
Cheers
_________________
samfieldhouse wrote: It is M9 for the shocks yes, the rest I'll check when next i'm underneath her. Ironically, this will be valentines day.
|
| February 16th, 2017, 11:34 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2145
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 The most Precise job on an A series....
Setting the Pinion "Height" and Pinion "backlash".
Needs a dial gauge and some shims.
Rick Pembro, Gearbox Guru is the expert.
|
| February 17th, 2017, 9:55 am |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2145
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4
|
| February 21st, 2017, 5:08 pm |
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
Re: Make Your Own ....2CV.... 4x4 Great work Pete, I used to mill stuff, we had an indexing head a bit like this https://www.google.co.uk/search?q=milli ... 9ksyDjE1DM: we used it to make PTO splined shafts for horticultural compost mixers. You could make your own gears when you've got five minutes 
|
| February 21st, 2017, 7:30 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2145
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 @rob massey55, thanks also that is interesting, as I can borrow an indexing head from the guys that wire erode the internal splines. The next project is to mill splines onto a shaft....so I may pick-up some hints from you 
|
| February 21st, 2017, 7:40 pm |
|
|
|
rob massey55
Firing on two.
Joined: December 21st, 2014, 7:33 pm
Posts: 869
Location: Rhayader Mid Wales
|
Re: Make Your Own ....2CV.... 4x4 Looking forward to seeing that!
|
| February 22nd, 2017, 12:28 am |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2145
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Acquired some Coil Over springs, will fit these over the front struts, to provide, the standard ride height. The plan being to use the LDS struts only when needed, thus the need for auto leveling should not be needed Newish Springs Attachment:
IMG_0450.jpg [ 444.79 KiB | Viewed 3636 times ]
|
| February 22nd, 2017, 6:14 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2145
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Got the loan:) of some Large tyres. Well it now looks the part. Attachment:
IMG_0462.jpg [ 417.95 KiB | Viewed 3618 times ]
Attachment:
IMG_0463.jpg [ 451.92 KiB | Viewed 3618 times ]
|
| February 26th, 2017, 4:17 pm |
|
|
|
subarupete
Firing on two.
Joined: March 5th, 2009, 6:23 pm
Posts: 2145
Location: Near Monmouth
|
Re: Make Your Own ....2CV.... 4x4 Maximum and Minimum Attachment:
Untitled.jpg [ 548.86 KiB | Viewed 3588 times ]
|
| February 28th, 2017, 6:01 pm |
|
|
|
Harley
Firing on two.
Joined: May 3rd, 2009, 11:40 am
Posts: 816
Location: Melbourne, Australia.
|
Re: Make Your Own ....2CV.... 4x4
_________________
samfieldhouse wrote: It is M9 for the shocks yes, the rest I'll check when next i'm underneath her. Ironically, this will be valentines day.
|
| February 28th, 2017, 11:02 pm |
|
|
