| International2cvFriends.com http://www.international2cvfriends.com/forum/ |
|
| Cooling fan keeping it's teeth? http://www.international2cvfriends.com/forum/viewtopic.php?f=19&t=1779 |
Page 1 of 2 |
| Author: | Macabry [ May 31st, 2010, 7:53 pm ] |
| Post subject: | Cooling fan keeping it's teeth? |
Hey Lads, I have never tried deep fording in a 2cv but by all accounts one must remove the cooling fan or risk throwing blades  . Granted the fan is moving at a great speed and under a lot of stresses, but has anyone come up with a way to get around this issue WITHOUT stopping to remove the fan.......???It is a question that has been puzzling me for ages...  Answers on a postcard to........ |
|
| Author: | Joe [ May 31st, 2010, 7:56 pm ] |
| Post subject: | Re: Cooling fan keeping it's teeth? |
i remember somewhere a writeup about a fan with a magnetic clutch, so that it can be stopped/slowed down for fording? i seem to remember a youtube video which i can't find right now. |
|
| Author: | Joolz [ May 31st, 2010, 8:04 pm ] |
| Post subject: | Re: Cooling fan keeping it's teeth? |
I think it may be SubaruPete who's got the clutch on his fan, and yes, there is a youtube vid of it somewhere. The other way is to wrap tarpaulin around the fan opening, Viking put pics up somewhere around here, it does mean stopping to fit it, but it's quicker than removing the fan. |
|
| Author: | c-diddy [ May 31st, 2010, 8:05 pm ] |
| Post subject: | Re: Cooling fan keeping it's teeth? |
when we go in deep water sometimes put an old car mat in front in between the bonnet and the fan so it stays in place. i wouldnt bother taking the fan off or putting a car mat in front for a ford! heres a video of mine in water and with the fan on and no mat i forgot it! http://www.youtube.com/watch?v=HRw7Q_mANpQ |
|
| Author: | Macabry [ May 31st, 2010, 8:11 pm ] |
| Post subject: | Re: Cooling fan keeping it's teeth? |
I've seen your vid before, very good stuff......I assume the teeth stayed put??? I guess what your saying is that you can get away with it ?.....
|
|
| Author: | c-diddy [ May 31st, 2010, 8:14 pm ] |
| Post subject: | Re: Cooling fan keeping it's teeth? |
well theres more important things to get than taking the fan off. 123 ignition raised pipe but thats just for wading in deep water harley coil - much better spark not to rev it to much going in to the ford and DONT let it stall. |
|
| Author: | spanners [ May 31st, 2010, 8:17 pm ] |
| Post subject: | Re: Cooling fan keeping it's teeth? |
Here you go chaps viewtopic.php?f=7&t=487&p=8549#p8549 
|
|
| Author: | c-diddy [ May 31st, 2010, 8:18 pm ] |
| Post subject: | Re: Cooling fan keeping it's teeth? |
and yes the blades always stay put. but a DG ignition apparently is more water resistant. pete subaru/polo posted a video and showed a really good way or making it water resistant but filing washers.. it might still be on here somewhere |
|
| Author: | Little Louis [ May 31st, 2010, 8:20 pm ] |
| Post subject: | Re: Cooling fan keeping it's teeth? |
I've got a c15 fan on a switch on mine only ever gone wrong once but that was in mud up to my knee on an old slag heap |
|
| Author: | Macabry [ May 31st, 2010, 10:03 pm ] |
| Post subject: | Re: Cooling fan keeping it's teeth? |
Harley coils, lots of folk do rave about them alright..... Do you have any pics of that C15 fan rig up?.....sounds Very cool (pun) 
|
|
| Page 1 of 2 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|