International2cvFriends.com
http://www.international2cvfriends.com/forum/

Cooling fan keeping it's teeth?
http://www.international2cvfriends.com/forum/viewtopic.php?f=19&t=1779		 Page 2 of 2
Author:  Little Louis [ May 31st, 2010, 10:10 pm ]
Post subject:  Re: Cooling fan keeping it's teeth?
will get some
Author:  Macabry [ May 31st, 2010, 10:23 pm ]
Post subject:  Re: Cooling fan keeping it's teeth?
Just took a good look at those Magnetic clutch fan pics......thanks Spanners.....some really nice work there. 8-) 8-) 8-)
Author:  Little Louis [ June 1st, 2010, 10:58 am ]
Post subject:  Re: Cooling fan keeping it's teeth?
Image


Image

Image

it goes via the brain on mine because its a visa so you could just take it from a power source, fuse, switch ect
Author:  Macabry [ June 1st, 2010, 12:48 pm ]
Post subject:  Re: Cooling fan keeping it's teeth?
OOOOHHH :!: That is sweet...... 8-)

Do you have any overheating issues or battery charging issues?

I love that arrangement,very neat.
Author:  Little Louis [ June 1st, 2010, 1:27 pm ]
Post subject:  Re: Cooling fan keeping it's teeth?
no battery charging problems the altenater drive belt goes to a cut off I guess drive bit cant get my camera in to show you :?
Author:  4x4 SuperFinn [ June 11th, 2010, 11:57 am ]
Post subject:  Re: Cooling fan keeping it's teeth?
Fitting cylinder temp guages is useful when fording. If the fan goes you'll know as you'll see the temp go up.

I used a C15 fan for a bit but had to give up as on road on hills the temp went up to 200c so I was forced to a crawl. Resorting to the standard fan brought the temp back down by 40c and I could go flat out.
Page 2 of 2 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/