International2cvFriends.com
http://www.international2cvfriends.com/forum/

2CV Turbo-Nautiques
http://www.international2cvfriends.com/forum/viewtopic.php?f=14&t=80
Page 1 of 2

Author:  Tim2cv [ January 29th, 2009, 11:52 pm ]
Post subject:  2CV Turbo-Nautiques

If you ever get chance to see these in action youl be very surprised!
They are fast as...

Image

Image

Image

Image

Image

Image

Been trying to find out more about them but cant (so far!)

Anyone?

Author:  Jonathan [ January 30th, 2009, 12:55 am ]
Post subject:  Re: 2CV Turbo-Nautiques

Could do with taking one of those at speed :twisted: through Gas Street Basin in the centre of Birmingham, right under the nose of the BBC Midlands studio :D .....Could be fun. :lol:

Author:  Little Rich [ February 24th, 2009, 11:51 pm ]
Post subject:  Re: 2CV Turbo-Nautiques

Presume water cooled!!!!

Author:  samfieldhouse [ May 12th, 2009, 1:03 am ]
Post subject:  Re: 2CV Turbo-Nautiques

do they use actual 2cv body shells :?:

That flat twin based outboard engine's quite impressive.

Author:  terpineol [ June 1st, 2009, 2:14 am ]
Post subject:  Re: 2CV Turbo-Nautiques

I'm currently looking to use a 2CV engine to power a speed boat if anyone has any information about the production of the propulsion systems used on the Turbo-Nautiques.

Many thanks.

Author:  Patrik [ June 21st, 2010, 11:18 am ]
Post subject:  Re: 2CV Turbo-Nautiques

A few years ago, i think it was in '99 or 2000 me and a buddy went to the ''museum'' of Alsace 2cv club. A long the collection there was also a 2cv powerboat... We dreamed about building one, but i never came to a built. I forgot about it really. But now i see some pics, it's beginning to boil again. Somebody has pics from a built??

//Patrik

Author:  Jonathan [ June 21st, 2010, 6:53 pm ]
Post subject:  Re: 2CV Turbo-Nautiques

Crap photo, I know :lol: But here's the 2cv boat thingy in the 2cv Alsace Museum

Attachments:
France & Stuff-Jan2010 032.JPG
France & Stuff-Jan2010 032.JPG [ 81.11 KiB | Viewed 9125 times ]

Author:  Jonathan [ September 29th, 2010, 5:28 pm ]
Post subject:  Re: 2CV Turbo-Nautiques

Just found this on Tube of You. Excuse the fact it's a Top Gear video and they sent Clarkson to do the piece, but even so, it's quite good in places.

http://www.youtube.com/watch?v=TD7TQIGM ... re=related

Author:  Joolz [ September 29th, 2010, 10:31 pm ]
Post subject:  Re: 2CV Turbo-Nautiques

I'd be interested to see one of these close up, and have a look at the water jacket on the heads. I wonder whether any particular precautions need to be taken while welding it, to stop it warping.

Author:  J-dub [ May 6th, 2011, 11:37 pm ]
Post subject:  Re: 2CV Turbo-Nautiques

looking at the last pic i would say thats probably a johnson outboard but obviously with a 602 lump in

this has me thinking
im doing a lot of fiberglassing at the moment, i quite fancy building one of these, i have a dyane engine, ive got tons of crap outboards and such
hmmm

im thinking now
joint project sam?

Page 1 of 2 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/